Product Introduction： The core technology of the multi-pulse method has changed the traditional test method, so that the problem of reading the high-resistance fault waveform that is difficult to solve is fundamentally solved. After the multi-pulse generator can transfor...

Product Introduction： This instrument accurately identifies one of the target cables from multiple cables to avoid serious accidents caused by accidentally sawing live cables. The cable identification starts from the operation at both ends of the cable. It must be ensur...

Product Introduction： The line fault tester is used to measure the distance from the fault point to the measurement point (transformer) when the permanent transmission ground (short circuit) or open circuit (open circuit) occurs on the overhead transmission line. The li...

Product Introduction： The high-voltage clamp ammeter breaks through the traditional structure and is specially designed and manufactured for measuring high-voltage current. It adopts new CT technology and mask digital integration technology. It is composed of a special c...

Product Introduction： The capacitance and inductance tester is mainly used to measure the capacitance value and total capacitance value, inductance value, resistive component, dielectric loss angle, loss factor, reactive power and active power of each phase of the compen...

Product Introduction： The pollution of the surface of the insulator contains soluble components and insoluble components. Among them, the gray density (NSDD) refers to the ratio of the insoluble components in the pollution of the surface layer of the insulator to the sur...